band saws band saw parts bandsaw faq rollin saw testimonials about rollin saw contact rollin saw
The Original Band Saw
| Price, Technical Data, Features, Options | Parts | Printable Page (Requires Acrobat) |

JM12120 Vertical Tool Die Band Saw Roll-In Saw Journeyman JM1220 Vertical Tool and Die Band Saw

From the digital speed control with readout to the calibrated tilt-table, the Journeyman Vertical JM1220 Tool and Die band saw from Roll-in Saw sets the standard for versatility.  To increase operator efficiency, the tilt-table moves 11” front to back by counterweight pressure controlled with a foot pedal and lock.

The variable speed control, tilt-table “Adjusto-Blok®” blade guides, blade guard, chip-clearing funnel, chip blower, angle plate and blades all add up to high performance when making contour and profile cuts, rip cuts, and the most complex angle cuts.

Pressure for the table feed is supplied by a counterweight, that is adjustable, supplying fifteen pounds to sixty pounds of cutting pressure.  Gravity supplies the power. The hydraulic regulator system further assures accurate chatter-free cutting speeds. 

The standard tilting table combined with power feed makes compound angle cuts practical.  This is a perfect precision-cutting machine for tool and die, R&D, and model shops.

Price:  $9,295.00

Technical Data
Capacity Under Guides
12 ½” Maximum, table-to-guide
Welded steel
Blade Size
3/4" Width x 12' 10" Length .035 Thick (bi-metal)
Blade Guard Blade
Blade Guides
“Adjusto-Blok®” blade guides for 1/4” to 3/4" blade widths
Blade Speeds
70 to 500 sfpm digital speed control with readout*
24” x 24”  Precision ground steel,  tilts 45° right, 10° left, 1° calibration marks
Feed Systems
Gravity feed
Aluminum, 20 ¼” x 1 ½” with polyurethane molded surface
2HP, 220/440V, 60-cycle, three-phase
Dimensions 46" Width x 80" Height x 30" Length
Shipping Weight 1,000 lbs. F.O.B. Cleveland, Ohio
Special Features
Table traverses: 11” front to back by counterweight pressure, controlled by foot pedal and lock
Compressed air chip blower
Optional Equipment
1” Welder, grinder, and shear

*Pulleys for optional speeds of 140-1038 and 280-2076 sfpm

(Specifications subject to change without notice)
One Year Limited Warranty

Replacement Parts for your JM1220 Vertical Tool and Die Band Saw

To find the distributor of the Roll-In Saw JM1220 Vertical Band Saw nearest you, click here.

Locate Roll-In Band Saw Distributor
Roll-In Saw Band Saws
vertical band saw
Model EF1459
Vertical All-Purpose Band Saw (Parts)
horizontal miter bandsaw
Model HM1212
Horizontal Miter Band Saw (Parts)
Horizontal Wet Mitre Bandsaw
Model HW1212
Horizontal Wet Miter Band Saw (Parts)
horizontal swivel band saw
Model HS1418
Horizontal Swivel Band Saw (Parts)
Deep Throat Vertical Band Saw
Model DT1340
Deep Throat Vertical Band Saw (Parts)
vertical economy bandsaw
Model JE1320
Journeyman 20" Vertical Economy Band Saw (Parts)
vertical tool die band saw
Model JM1220
Journeyman Vertical Tool & Die Band Saw (Parts)
vertical tilt-frame bandsaw
Model TF1420
Vertical Tilt-Frame Band Saw (Parts)
Roll-In Saws are available through a network of distributors.  To find a distributor near you, click here.

© 2015 Roll-In Saw • 15851 Commerce Park Dr. Brook Park, Ohio 44142 USA
Phone: 216.459.9001 • Fax: 216.459.9220
Web Design by Vizpro • Webmaster